Surfapore R

Surface Application: The application surface should be dry and clean. Apply SurfaPore R by using a brush, a roller or spraying. No dilution is required. On very absorptive surfaces re-apply within 3 hours. Dipping: Dip the clay based surface in SurfaPore R for 30 seconds. In any case (surface application or mixing) test results on a small area before full scale application. Maximum water repellence is achieved 24 hours post application. Consumption Rate: 9-11 square meters per litre of SurfaPore R. Packaging: PE PE Containers 1L, 4L, 30L, IBC 1000L.